Truck accidents in Colorado are serious disasters. Each year, thousands of people die in accidents involving large commercial trucks. Those who survive these accidents often suffer catastrophic injuries. Prevention is always better than cure, and there are five strategies you can use to help prevent truck accidents in Colorado. Follow these five strategies and you’ll be well on your way to staying safe on Colorado roadways. This will also help you keep your passengers safe too. You can consult with Boulder Truck Accident Lawyer for advice.
Unsafe road conditions
The weather can have a huge impact on trucking accidents. During the winter, snow piled up on mountain roads is dangerous. In addition, wind and blowing snow make driving a challenge. Unprepared drivers may lose control on the slippery roads and crash. If you’re a truck driver, you should learn how to navigate the road safely in inclement weather. Unsafe road conditions are a key cause of truck accidents in Colorado.
Regardless of whether a truck is large or small, it’s a dangerous vehicle. A truck can weigh four times as much as a passenger car, so the occupants of a passenger car often suffer serious injuries. Some accidents are the fault of a drowsy truck driver, distracted driving, or dangerous road conditions. These factors can lead to devastating accidents and even fatalities.
Drivers can reduce their risk of being in a truck accident by not driving while impaired. Impaired drivers should be aware of Colorado traffic laws. Texting while driving is illegal, and young drivers are also subject to alcohol restrictions. It is always best to consult an attorney after an accident to ensure that the responsible party is held accountable for the consequences. Impaired driving can result in serious accidents and the victim of the negligence of another driver may be entitled to financial compensation for his or her injuries.
One of the leading causes of truck accidents in Colorado is impaired drivers. Commercial drivers are legally required to take a rest, but many choose to drive long hours without taking a break. Federal laws also prevent truck drivers from driving too long without rest. In Colorado, truck drivers are required to take mandatory breaks and must have a certain number of rest hours each day. Truckers are held to stricter standards than passenger vehicle drivers, and their behavior is highly susceptible to accidents.
Poorly maintained equipment
In Colorado, truck drivers are required by law to perform routine maintenance and check equipment. But some companies cut corners, resulting in faulty equipment and accidents. Faulty equipment and machinery can cause work-related injuries or accidents. In these cases, drivers may be eligible for workers’ compensation benefits. Here are some ways that poorly maintained equipment can cause accidents. Identify and fix problems before they happen. In Colorado, truck drivers should be sure to perform routine visual inspections of their equipment before driving.
Tire tread and windshields are two important components of truck maintenance. Proper tire tread can help prevent truck accidents and make trucks safer on the road. A worn windshield or a busted wiper can impair visibility, resulting in a serious accident. If you don’t fix these problems immediately, you can make truck accidents more likely to occur. And while it may not be possible to prevent all accidents, you can at least minimize the risks associated with truck crashes by checking your truck’s condition regularly.
Stay out of a truck’s blind spot
You may be surprised to learn that a large truck has a blind spot. This area, called a “No-Zone,” means that a truck driver cannot see anything other than the truck itself. To reduce the chance of an accident, avoid staying in a truck’s blind spot as much as possible. When passing a truck, be sure to leave plenty of room and use turn signals before changing lanes.
The blind spot of a large truck is one of the most dangerous areas on the road. It is difficult for drivers to see the truck driver, so they need to stay out of the blind spot to avoid accidents. A truck driver should be especially vigilant when merging lanes or changing lanes, since blind spots are often larger than those of standard passenger vehicles. The blind spot on a commercial truck is significantly larger than that of a standard passenger vehicle.
Beware of blown-out tires
While tire blowouts are common on the highway, they can be extremely dangerous to your safety. Blown tires can cause the vehicle to veer to one side or even lose traction completely. The driver may not have time to react to the sudden change of direction, so he or she may slam on the brakes to avoid a possible accident. In some cases, the driver may also lose control of the vehicle when they attempt to pull over to change the tires.
The most common time for tire failure is during the hotter months. During this time, temperatures on the road rise significantly, causing the tires to break down. This rapid flexing can lead to tire overheating and internal components to separate. Unlike front-tire problems, rear-tire failures are more likely to cause catastrophic accidents. Without two rear tires, a truck could spin out and cause a serious accident.
Avoid playing “chicken” with a truck
If you’re driving in Colorado, you’ve probably seen this video: a blue Toyota Corolla passes a parked truck, and applies the brakes to avoid the crash. Two tractor-trailers and four other vehicles were also involved, and the collision ended up tying up traffic for hours. The unlucky Corolla slid away unscathed.